Follow these professional floor preparation and application steps to achieve a seamless, durable and premium microtopping floor finish.
Inspect the floor for cracks, hollow areas, moisture, unevenness, oil stains, old coatings and surface weakness. Identify repair areas before starting the work.
Grind, sand or mechanically prepare the floor to create a clean and bondable surface. Remove dust completely using vacuum cleaning.
Fill cracks, dents, joints and damaged areas with suitable repair material. Allow repairs to cure properly before coating.
Apply Jaypore recommended floor primer or bonding primer as per substrate condition. Primer helps improve adhesion and controls surface absorption.
For uneven or tiled surfaces, a base coat or scratch coat may be required. This helps create a stronger and more uniform base for microtopping.
Mix the Jaypore Microtopping Floor Texture components as per recommended ratio. Use clean tools and avoid over-dilution. Mix until smooth and lump-free.
Apply the first coat using a stainless steel trowel or floor trowel. Spread the material evenly in thin layers and maintain controlled trowel movement.
After drying, sand the surface lightly to remove ridges or imperfections. Vacuum the floor thoroughly before applying the next coat.
Apply the second coat to refine the finish, improve coverage and create the desired texture movement. Allow it to dry properly.
After final drying and surface preparation, apply a floor-grade protective sealer. Two or more coats may be required depending on traffic, exposure and desired sheen.
Jaypore Microtopping Floor Texture is easy to maintain when protected with the recommended sealer and maintained properly.
Clean Regularly
Use a soft broom, microfiber mop or vacuum cleaner to remove dust and dry particles. Regular cleaning prevents surface scratching.
Use pH-Neutral Cleaner
Clean the floor with a damp mop and pH-neutral floor cleaner. Avoid acidic, alkaline or solvent-based cleaners.
Avoid Harsh Scrubbing
Do not use steel wool, hard scrub pads or abrasive cleaning powders. These can damage the protective sealer.
Protect from Sharp Objects
Use furniture pads under chairs, tables and heavy furniture. Avoid dragging sharp or heavy objects across the floor.
Clean Spills Quickly
Wipe spills as soon as possible, especially oil, coffee, wine, chemicals, food stains and colored liquids.
Use Mats at Entry Points
Place doormats at entrances to reduce dust, sand and small stones that may scratch the sealer.
Avoid Standing Water
Do not allow water to remain on the floor for long periods. Clean wet areas quickly to protect the surface.
Reseal When Required
Depending on traffic and usage, the protective sealer may need periodic renewal. This helps maintain durability, stain resistance and finish quality.
Jaypore focuses on professional-grade decorative coating systems designed for quality, consistency and premium project performance.
Jaypore Microtopping Floor Texture creates a clean, joint-free and contemporary floor finish that enhances the overall space design.
The system can be customized in shade, movement, texture, sheen and sealer finish to match residential, commercial and hospitality interiors.
Jaypore supports applicators, designers, architects and contractors with surface preparation guidance, system selection and application recommendations.
Jaypore Microtopping Floor Texture is a thin decorative cementitious floor coating used to create seamless concrete-inspired floors. It gives a modern, joint-free and premium look. The system is applied in layers and protected with a floor-grade sealer.
It can be used in homes, offices, showrooms, cafés, restaurants, hotels, boutiques, studios and luxury interiors. It is best suited for interior floors and selected commercial areas with proper system selection. The substrate must be strong, dry and properly prepared.
Yes, it may be applied over existing tiles if the tiles are stable, non-hollow, clean and properly prepared. The surface usually requires grinding, bonding primer and a suitable base coat. Loose or hollow tiles must be repaired before application.
Yes, when applied with proper surface preparation, primer, correct layer build-up and protective sealer, it can provide a durable decorative floor finish. Durability depends on traffic, maintenance, sealer quality and substrate condition. Periodic resealing may be required in high-traffic areas.
Microtopping itself should not be treated as a waterproofing solution. With the correct sealer, it can resist normal cleaning and occasional spills. For wet areas or moisture-prone floors, a proper waterproofing or moisture-control system is required before application.
The typical total build-up is approximately 2 mm to 4 mm depending on substrate condition, primer, base coat and number of finish coats. This makes it useful for renovation projects where low floor build-up is preferred. Final thickness should be confirmed as per project system.
Jaypore Microtopping Floor Texture can be finished in matte, soft satin or natural concrete look depending on the protective sealer. The texture can be smooth, cloudy, raw or industrial depending on trowel movement. Custom shades can also be developed for project needs.
Clean the floor regularly with a soft mop or vacuum. Use pH-neutral cleaners and avoid acids, bleach, harsh chemicals and abrasive scrubbers. Use furniture pads and clean spills quickly to protect the sealer.
Indicative coverage is approx. 18–35 sq. ft. per kg per coat depending on floor condition, thickness and application method. Heavy repair, porous surfaces or thicker texture profiles may consume more material. A site sample is recommended for accurate coverage.
Jaypore offers a premium seamless floor texture system with modern design appeal, custom finish options and technical project support. It is ideal for architects, designers, contractors and project owners looking for a refined concrete-inspired floor finish.
Jaypore Microtopping Floor Texture is a premium seamless flooring solution created for modern spaces that need elegance, durability and design continuity. It transforms ordinary floors into refined concrete-inspired surfaces with a clean, joint-free and international look.
With proper surface preparation, professional application and a suitable protective sealer, it becomes a practical decorative floor system for homes, offices, showrooms, cafés, restaurants, hotels, villas and boutique commercial interiors.
For architects, designers, applicators, builders and project owners looking for a premium microtopping floor texture manufacturer, Jaypore offers a high-quality flooring solution with design flexibility, technical guidance and modern architectural appeal.
Copyrights © 2023 All Rights Reserved by Jaypore Luxury Texture