Follow these professional steps to create a seamless, durable and premium microcement finish for walls and floors.
Check the wall or floor for cracks, moisture, hollowness, unevenness, dust, weak plaster, oil stains and old coatings. Identify all repair areas before starting.
Grind, sand, scrape or mechanically prepare the surface as required. Remove all loose particles and vacuum the area thoroughly.
Fill cracks, holes, dents and damaged areas using suitable repair material. Allow repairs to dry or cure properly before applying primer.
Apply Jaypore compatible primer or bonding primer according to the substrate. Primer improves adhesion and controls surface absorption.
For floors, tile surfaces or uneven substrates, a base coat or reinforcement layer may be required. This improves strength and creates a uniform base.
Mix Jaypore Microcement Texture components as per recommended ratio. Use clean tools and mix until a smooth, lump-free consistency is achieved.
Apply the first coat using a stainless steel trowel or spatula. Keep the layer thin and even. Use controlled trowel movement to create natural texture.
After drying, sand the surface lightly to remove ridges and imperfections. Clean dust completely before applying the next coat.
Apply the second coat to refine the appearance, improve coverage and build the desired microcement effect. Allow proper drying.
Apply the recommended Jaypore protective sealer or PU topcoat. For floors and wet areas, multiple sealer coats may be required as per system specification.
Jaypore Microcement Texture is easy to maintain when protected with the recommended sealer and cleaned correctly.
Clean Regularly
Use a soft cloth, microfiber mop or vacuum cleaner to remove dust and dry particles. Regular cleaning helps protect the sealer from surface scratching.
Use pH-Neutral Cleaners
Clean the surface with a mild pH-neutral cleaner. Avoid acidic, alkaline, bleach-based or solvent-based cleaners.
Avoid Abrasive Scrubbing
Do not use steel wool, hard scrub pads or abrasive powders. These can damage the protective sealer and reduce surface life.
Clean Spills Quickly
Wipe coffee, oil, wine, food stains, chemical spills and colored liquids quickly to prevent staining.
Use Furniture Pads
For floors, place felt pads under furniture legs. Avoid dragging heavy or sharp objects across the surface.
Avoid Standing Water
Do not allow water to remain on the surface for long periods. Clean wet areas promptly, especially on floors.
Maintain the Sealer
The protective sealer may need renewal depending on traffic, cleaning method and exposure. Periodic resealing helps maintain long-term performance.
Use Professional Touch-Up
For visible scratches, chips or damage, professional repair is recommended because microcement finishes require blending and resealing.
Jaypore focuses on quality raw materials, consistent production and professional decorative coating systems designed for modern project requirements.
Jaypore Microcement Texture creates a joint-free, minimal and globally preferred surface finish suitable for luxury residential, commercial and hospitality interiors.
The system can be customized in shade, movement, texture, surface feel and sealer finish to match different design themes and project needs.
Jaypore supports architects, designers, applicators, contractors and project owners with surface preparation guidance, system selection and application recommendations.
Jaypore Microcement Texture is a thin decorative cementitious coating used to create seamless concrete-inspired surfaces. It can be applied on walls, floors and selected design areas. The system is protected with a sealer for durability and cleanability.
It can be used in homes, offices, showrooms, cafés, restaurants, hotels, bathrooms, kitchens, studios and luxury interiors. It is suitable for walls and floors when the correct system is selected. The surface must be strong, dry and properly prepared.
Yes, microcement can be applied over existing tiles if the tiles are stable, non-hollow and properly prepared. The surface usually needs grinding, primer and a suitable base coat. Loose, cracked or hollow tiles must be repaired before application.
Microcement should not be considered a waterproofing product by itself. With the correct sealer, it can resist normal cleaning and occasional water exposure. Wet areas require proper waterproofing beneath the microcement system.
Yes, it can be used in bathrooms when applied with the correct waterproofing, primer, microcement layers and protective sealer. Surface preparation and sealing are very important in wet areas. Professional application is strongly recommended.
The typical total build-up is approximately 2 mm to 3 mm depending on the system and substrate condition. This low thickness makes it suitable for renovation projects. Final thickness should be confirmed based on project requirements.
Yes, microcement can be durable for residential and selected commercial floors when applied with proper substrate preparation and protected with a floor-grade sealer. Durability depends on traffic, maintenance and sealer quality. Periodic resealing may be required.
Clean regularly with a soft cloth or microfiber mop and use pH-neutral cleaners. Avoid harsh chemicals, acids, bleach and abrasive scrubbers. Clean spills quickly and maintain the protective sealer for long-term performance.
Indicative coverage is approx. 20–40 sq. ft. per kg per coat for walls and 18–35 sq. ft. per kg per coat for floors. Actual coverage depends on surface porosity, layer thickness and application method. A site sample is recommended for accurate estimation.
Jaypore Microcement Texture offers a premium seamless finish, design flexibility, manufacturer-grade quality and technical project support. It is ideal for architects, designers, contractors and project owners who want modern, durable and international-standard surfaces.
Jaypore Microcement Texture is a premium decorative coating system created for modern walls, floors and design surfaces that require seamless beauty and international appeal. It provides a refined concrete-inspired look with natural movement, smooth texture and strong design flexibility.
With proper surface preparation, professional application and the recommended protective sealer, Microcement Texture becomes a durable, stylish and easy-to-maintain surface finish for homes, hotels, restaurants, cafés, offices, showrooms, bathrooms, kitchens and luxury interiors.
For architects, designers, applicators, builders and project owners looking for a reliable microcement texture manufacturer, Jaypore offers a high-quality decorative coating solution with premium aesthetics, technical support and modern architectural value.
Copyrights © 2023 All Rights Reserved by Jaypore Luxury Texture